This device will let you know when someone or something is crawling around when your back is turned.

The Driveway Alarm is a wireless sentry system for vehicle or human (or critter) detection up to 20ft from the sensor. (Ours detects presence around 200 feet)

Installs in minutes- just place the sensor at the entrance of your driveway or pointed in the direction you would like to monitor and place the receiver inside your home. No wires needed.  Simply turn it on. 

The receiver can be placed anywhere in your house, up to 200ft. away from the sensor.  (Ours works when placed over 300 ft from the sensor)

System includes one passive infrared motion sensor and one receiver.

Extremely easy to use and install - sets up in minutes.

Receiver features an on/off switch and low/high sound settings.

The motion sensor has a 20-ft detection range and can transmit a signal to the receiver up to 200 ft.* away.

Does not require a direct line of sight between the motion detector and receiver.

Weather Resistant motion sensor assembly.

Sensor operates on 1 "9V" battery for up to a year. Receiver plugs into the wall (adapter not included) or can operate on 3 "C" batteries as well. (We use AA-to-C Cell battery converters)

Compact size driveway monitor- the sensor measures 4" x 2.5" x 2" and the receiver measures 5" x 3" x 1.5".

We installed one of these to monitor our very long driveway.  It turns out that the sensor covers our entire front yard which is very nice.  We are now installing them to watch our backyard and the area around an out building.  We like them so much, we decided to carry them in our store.

Note: Although line of site is not required, the maximum range is based on optimal conditions with minimal interference. Wireless range is affected by objects such as walls, trees, etc. Actual range may vary, depending on your environment.